IPB

Welcome Guest


 
Start new topic
> How to read a Nero log
binkie7
post Mar 5 2008, 04:37 AM
Post #1


Member
Group Icon

Group: MVP
Posts: 11
Joined: 5-March 08
From: Maryland
Member No.: 7,203,570



Okay here we go – the basic’s on reading a Nero Burn log.
The burn logs are text files & can be found here:
Nero 6: Program Files>Ahead>Nero>NeroHistory

Nero 7:Program Files>Nero>Nero 7>Core>NeroHistory


Windows XP 5.1 OS you have on the PC

IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 8/14/2004 5:36:38 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero is using their own aspi – For Nero 7 they now use Microsoft’s SPTI. The log will still show this whether Nero is using Microsoft’s or their own aspi. If Nero was using Microsoft’s it would be right above the version # - like this
NT-SPTI used
The only time to look at Nero’s aspi is if you see a bunch of questions marks in here: WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 8/14/2004 5:36:38 PM
You can then check Nero ToolKit>InfoTool>aspi tab and see if shows as corrupt. A new one can be downloaded from Nero’s site if it is -Wnaspi32 http://ww2.nero.com/nero7/enu/ASPI_Driver.html


Nero Version: 6.6.0.18 Version of Nero you are using
Internal Version: 6, 6, 0, 18e
(Nero Express) App in Nero you are using Recorder: <BENQ DVD LS DW1655> Version: BCHB - HA 0 TA 1 - 6.6.0.18 Burner used for recording this project w/ make & model with firmware version using
You can check the manufacturer’s site or http://rpc1.org to see if you are using the latest one.

Adapter driver: <atapi> HA 0 How the drive is connected – this one showing connected by ide cable
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder What’s weird here is Nero is just classifying the drive as generic – no biggie

CD-ROM: <BENQ DVD LS DW1655 >Version: BCHB - HA 0 TA 1 - 6.6.0.18 2nd drive make, model & firmware version

Adapter driver: <atapi> HA 0
=== Scsi-Device-Map === Listing all drives connected internally Also lists how the drives are connected, the transfer mode, the port they are on & configuration . These are connected by IDE and transfer mode is DMA. The LiteOn & BenQ are on the primary port as master & slave. The hard drive is on the secondary port as master. If DMA shows off you will need to enable it. PIO is a much slower transfer mode. If connected by Nvidia or Raid controllers Nero does not report DMA correctly.
CdRomPeripheral : LITE-ON DVDRW SHM-165H6S atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD LS DW1655 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST380011A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map === Listing the reader/writer drives connected internally
LITE-ON DVDRW SHM-165H6S D: CDRom0
BENQ DVD LS DW1655 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047532kB) Total amount of ram installed
Free physical memory: 194MB (199300kB)How much is free while doing this project (takes all things running into this figure)
Memory in use : 80 % percentage in use – keep as much free as possible
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.8.2006
UDF/ISO compilation

8:04:51 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started Preparing the files

8:05:09 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified) Finished successfully preparing the files to burn

8:05:09 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE Settings in Nero – False is No – True is Yes.
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

8:05:09 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

8:05:09 PM #5 Text 0 File Reader.cpp, Line 127
Reader running Accessing the file to burn

8:05:09 PM #6 Text 0 File Writer.cpp, Line 122
Writer BENQ DVD LS DW1655 running Accessing the burner and blank media info

8:05:09 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:05:10 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:05:11 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

8:05:11 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB) Amount of space on disc to write too
Last address to be written: 2232863 (496:11.38, 4361MB) Size of the all the files you are burning

8:05:11 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

8:05:11 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: BENQ DVD LS DW1655, Media type: DVD-R Recorder and media type
Disc Manufacturer: TYG02 - Disc manufacturer info – if ‘Media Type +R (or –R)’ is listed here than drive does not fully recognize the disc. This is where keeping the firmware up to date helps.
Disc Application Code: 64, Disc Physical Code: 193

8:05:11 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:05:11 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2232864 (2232864) = #2232864/496:11.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2232864 blocks [BENQ DVD LS DW1655]
--------------------------------------------------------------

8:05:11 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [BENQ DVD LS DW1655] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4572905472, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2232864 | lead-out | 1 | 0x41 | 0x00

8:05:11 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started writing the files you are burning to the buffer

8:05:12 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

8:05:12 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

8:05:12 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s) Burn begins and at what speed

8:05:12 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:05:12 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode

8:05:12 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Seamless Link -> ON

8:05:12 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes

8:05:12 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ---- Info on the media you are using – lot of gibberish to me :)
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]: -R media usually does not have the media specific codes - +R will –
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

8:20:42 PM #25 Text 0 File WriterStatus.cpp, Line 116
<BENQ DVD LS DW1655 > start writing Lead-Out at LBA 2232864 (221220h), lenght 0 blocks

8:20:42 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:20:42 PM #27 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 2232863

8:21:21 PM #28 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s) Done!! Successful burn at 4x


Existing drivers: Lists drivers that may cause a possible conflict w/ Nero. Ones to look for if you are receiving failed burns - you should probably uninstall – Nero’s InCDpass.SYS' and Roxio’s CDRALW2K.SYS and run the clean tools for each
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 5:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 8/14/2004 5:36:38 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 9/23/2005 10:59:49 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Go to the top of the page
 
+Quote Post
zingzog
post Mar 12 2008, 11:53 PM
Post #2


Newbie
*

Group: Members
Posts: 7
Joined: 12-March 08
Member No.: 8,079,322



Wow, I'm impressed!

By the way, you mention the booleans "False is No – True is Yes". Have you heard about the Californian booleans?
Fersure and Noway? 8-)

Regards,

ZZ
Go to the top of the page
 
+Quote Post
binkie7
post Mar 31 2008, 06:34 PM
Post #3


Member
Group Icon

Group: MVP
Posts: 11
Joined: 5-March 08
From: Maryland
Member No.: 7,203,570



Thanks zingzog!

I need to do a new - this is an old one I posted at Afterdawn. Not that much has changed but it might look better if I used a newer version of Nero :)
Go to the top of the page
 
+Quote Post
ploughmanRet
post Mar 12 2011, 11:08 PM
Post #4


Advanced Member
***

Group: Members
Posts: 359
Joined: 8-February 11
Member No.: 8,893,239



binkie7

I think that many DAWNS have passed.

Or is that you can not keep up with the Changes that have occurs since Nero 7.

Perhaps binkie7 has been retired. No input since July 2008

This post has been edited by ploughmanRet: Mar 12 2011, 11:09 PM
Go to the top of the page
 
+Quote Post

Closed Topic